Accessories Connections - HANNspree SN10T2 User Manual

Removing a Memory Card
+
IMPORTANT:
To prevent damage to information stored on the memory card, unmount the
card before removing it from the device.
CAUTION:
!
Removing the memory card while saving data may cause loss of data and
damage to your memory card.
Remove the memory card by performing the following:
1. From the Home
storage-> Unmount SD card.
1. Open slot cover (C) to expose memory slot (A).
2. Press memory card (B) to release it from slot.
3. Pull memory card from slot.
4. Lift cover (C) and press until flush.

Accessories Connections

Headphones
Your Tablet has a headphone jack that allows you to connect headphones to the device for
listening to the audio programming.
To connect headphones to your Tablet, perform the following:
Figure 31. Connecting Headphones
1. Insert headphones connector (A) into the headphone jack (B) (Figure 31).
2. Remove headphones when not in use.
Chapter 6: Connections
Screen, press the Menu Key-> Settings-> SD card and & internal
0
(Figure 30)
B
B
0
0
A
A
28