Buttons And Connections - HANNspree HANNSpad SN97T4 User Manual

Buttons and Connections:

1. Power button
For all new device, it is recommended to use the adaptor included to charge
up at least 8 hours before use.
Press the power button for around 2 sec to turn on the device, the screen will
light up.
Press and hold the power button for longer time to power off the device, a
menu will appear to ask you whether you want to power off the decice. When
the device is on, press the power button once will cause the device go to sleep
mode. When device is in sleep mode, press the power button once will wake
up the device.
System Reset: Press the power button and hold for 4 seconds to reset (
so the device will power off and t
lost. Please be cautious before you do this.)
2. Volume up
When playing video or music, press this button to turn up volume.
3. Volume down
When playing video or music, press this button to turn down volume.
4. 5VDC charging port, connect 5V, 2.1A adaptor to charge the device.
5. USB port– connect Mini-usb cable to this jack to copy data, apk or connect to
external device.
6. Mini-HDMI port – use Mini-HDMI cable to connect to TV, display to play 1080P
video.
7. Headphone jack – connect headphone to listen to music or video.
8. Micro SD card slot – support maximum 32GB Micro SD card extension storage.
9. MIC – The built-in mono microphone can be used for video conferencing, voice
narrations, or simple audio recordings.
10. Capacitive touch panel – support multi-touch screen control with fingers, can
enlarge or reduce pictures.
11. Front camera – support skype, snap shot and recording video.
12. Rear camera – support snap shot and video record.
13. Speaker – play music in stereo when no headphone is connected.
Tablet User Guide
he currently downloading application will be
Doing
Page 6