Table of Contents
Advertisement
16
Instruments and Indicator/Warning Lights
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched off. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
switching off the ignition. The memory will be is automatically erased, on the other
hand, if the trip is interrupted for more than 2 hours.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual jour-
neys up to a total of 99 hours and 59 minutes driving or 9.999 kilometres driven.
The memory is deleted when either of these limits is reached and the calculation
starts from anew.
The total-trip memory will not, contrary to the single-trip memory, be deleted after
a period of interruption of driving of 2 hours.
Note
All information in the memory is erased if the battery of the vehicle is
disconnected.
Using the system
A
The rocker switch
and the button
A
⇒ fig.
window wiper lever
8.
Fig. 8 Multi-functional
indicator: Control
elements
A
are located in the grip of the
B
Selecting the memory
– Repeated short-term pressing of the button
the individual memories.
Selecting the functions
A
– Press the rocker switch
up or down. This will cause the individual
A
functions of the multi-functional indicator to appear in the display
one after the other.
Setting function to zero
– Select the memory you want.
A
– Press button
for more than 1 second.
B
The following readouts of the selected memory will be set to zero by button
•
average fuel consumption,
•
distance driven,
•
average speed,
•
Driving time.
You can only operate the multi-functional indicator when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
The outside temperature indicator will appear with a snowflake symbol and a
warning signal sounds* when the outside temperature lies between +5°C and -5°C.
The symbol warns the driver of the possible danger of ice on the road. After the
A
rocker switch
is pressed, the function displays the one which you last selected
A
before switching off the ignition.
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
The correct outside temperature will be indicated with a delay of 5 minutes. If the
vehicle is stationary (or driven at a very low speed) the temperature indicated may
A
allows one to select
B
A
:
B
Advertisement
Table of Contents
