6
Basic setting
Basic setting
Sound settings
By pressing the button
you can select the following parameters:
•
- Setting of height, middle and depth;
Tone setups
•
- Volume ratio (left and right = balance), (front and rear = fader);
Balance Fader
•
-
,
Volume
Startup volume
Traffic announcements
volume, traffic announcements and volume of park distance control signal;
•
- Speed dependent volume adaptation
GALA
•
Confirmation tone
Volume decrease for park distance control (PDC) *
If your vehicle is equipped with "parking aid", the volume is automatically
decreased to a pre-defined value, when the "parking aid" is active.
GALA function
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
RADIO selector key
Selecting a radio station
Call up main menu RADIO and choose frequency range
– Press the
selector key to call up the main RADIO menu. The
RADIO
currently heard radio station is indicated at the top of the display.
– To change the frequency range, press the function key
or
in the opening pop-up window. The current frequency
FM
AM
range is indicated at the top left of the display.
Changing a radio station
– When briefly pressing the arrow keys on the unit
Selecting a radio station from the station list
and
* - Switch on
PDC
– Press the function key
– Choose the desired station by pressing the respective selection. After
Function keys in the radio main menu
1...
keys to be displayed are determined in the menu Setup Radio.
Band
Station list
Memory
Extras
Man.
Searching and storing radio stations
Manual search
and on
Band
– Turn the Set button
on the display of the main menu RADIO, you change to the previous
or following station.
Station list
currently be received. The list "skips" directly to the display of the
currently heard radio station.
about 20 seconds without operation the image of the station list will
close automatically.
to
...42
– Station keys for storing or calling up a stored radio station. The station
– Button for selecting the desired frequency range.
– opens the list of the presently receivable radio station.
– opens the list of the stored radio station.
– Button for calling up the automatic play
– opens the frequency band of the selected frequency range.
A
in the main menu RADIO or press the function
8
key
. The scale of the selected frequency range is inserted in the
Man.
frequency band in the lower part of the display.
A
or the arrow keys
3
to display all radio stations that can
or for inserting radio text.
Scan