Table of Contents
Advertisement
VSX SERIES STEAMER - REMOVAL AND REPLACEMENT OF PARTS
5. Loosen the screws from the motor assembly
and lift up on the motor to remove it from the
valve body.
6. Remove the screws from the cover plate and
remove the cover plate and ball assembly from
the valve body.
NOTE: When re-installing, place flat sides of ball
stem perpendicular to the inlet and outlet of the
drain valve. The valve will be in the open position
whenever power is removed from the motor.
7. Reverse procedure to install.
Page 17 of 40
Hide quick links:
Advertisement
Table of Contents
