Hardware Reset; Status Led - Vivotek SD7313 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Hardware Reset

The reset button is used to reset the system or restore the factory default settings� Sometimes
resetting the system can return the camera to normal operation� If the system problems remain
after rebooting, restore the factory settings and install again�
Reset: Press and release the reset button with a paper clip or thin object� Wait for the Network
Camera to reboot�
Restore: Press and hold the reset button until the status LED rapidly blinks red and green
simultaneously� Note that all settings will be restored to factory default�
SD Card Capacity
This network camera is compliant with SD/SDHC 16GB / 8GB and other preceding standard SD
cards�

Status LED

The color of LED indicates the status of the Network Camera�
Item
Steady Red
1
Red LED unlighted
Steady Red + Blink Green every 1 sec�
2
Steady Red + Green LED unlighted
3 Steady Red + Blink Green every 2 sec�
4 Blink Red every 0�15 sec� + Blink Green every 1 sec�
5 Blink Red every 0�15 sec� + Blink Green every 0�15 sec� Restore default
6 - User's Manual
LED status
Reset Button
Description
Power on and system booting
Power off
Network works (heartbeat)
Network fail
Audio mute (heartbeat)
Upgrading Firmware