Table of Contents
Advertisement
Print Information (continued)
Select the desired operation.
[CONFIRM]: Press this to confirm the settings.
Press
1
After confirming the settings, press ENTER.
2
Select [END] and press ENTER.
3
[CLEAR ALL]: Press this button to clear all settings.
Press
1
To clear all settings, select [EXECUTE] and press ENTER.
2
To cancel [CLEAR ALL], select [CANCEL] and press ENTER.
To remove the write-protection, select [YES] and press ENTER.
3
Select [END] and press ENTER.
4
• When the SD Memory Card already contains a DPOF information file, the message "RECREATE
DPOF FILE?" is sometimes displayed. Note that if you select [YES], the file is overwritten, and the
information of the existing DPOF information file is erased. The same also applies when the DPOF
information file is overwritten on a personal computer and values not supported by this camera were
set.
• Images set in the DPOF format are automatically protected. Write-protection cannot be removed by
regular methods.
• You can specify up to 99 prints or up to 999 frames in a single SD Memory Card. The maximum
number of prints you can specify in a single SD Memory Card is limited to 10000.
or
to select [CONFIRM], and press ENTER.
or
to select [CLEAR ALL], and press ENTER.
107
Hide quick links:
Advertisement
Table of Contents
