Interrupt Request Table; Pci-Express Slots; Diagram Of Pci-Express Slot Locations And Functions - EVGA 133K8NF41AX User Manual

User manual
Table of Contents

Advertisement

2-5-3
Interrupt Request Table For This Motherboard
Interrupt requests are shared as shown in the table below:
INT A
Slot 1
Slot 2
Slot 3
Onboard USB 1
X
Onboard USB 2
AC97/MC97
IMPORTANT!
If using PCI cards on shared slots, make sure that
the drivers support "Shared IRQ" or that the cards
don't need IRQ assignments. Conflicts will arise
between the two PCI groups that will make the
system unstable or cards inoperable.
2-5-4

PCI-Express Slots

This motherboard provides three PCI-Express slots intended for Graphics (Two
symmetrical PCI-Express x16 graphics slots - 8x effective - on the left and right
deliver up to 2Gbyte/sec data transfer rate at each relative direction which is
fully compatible with the latest NVIDIA SLI Technology [SLI version only]. The
one PCI-Express x16 graphics slot in the center offers 4Gbyte/sec data transfer
rate at each relative direction.), and one x1 PCI-Express Slot. Fully compliant to
the PCI-Express Base Specification revision 1.0a , supporting PCI-Express
VGA card, and other PCI-Express devices.
EVGA.com Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
INT B
INT C
INT D
INT E
X
X
X
X
X
FROM TOP TO BOTTOM
1x PCI-E
8x PCI-E (for SLI operation)
16x PCI-E (for standard graphics
card operation)
8x PCI-E (for SLI operation - note
that this slot will be the primary
graphics out slot when running in
SLI mode - so make sure to attach
your monitor cable to this card's
VGA out.)
Page 16
INT F
INT G
INT H

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nforce4 133-k8-nf43 series

Table of Contents