Chapter 2: Hardware Installation; Installing Central Processing Unit (Cpu) - Biostar G31-M4 Setup Manual

CHAPTER 2: HARDWARE INSTALLATION

2.1 I
NSTALLING
Step 1: Pull the lever sideways away from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the white dot/cut edge. The white dot/cut edge should
point wards the lever pivot. The CPU will fit only in the correct
orientation.
Step 3: Hold the CPU down firmly, and then close the lever to complete
the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN
power cable to the CPU_FAN1. This completes the installation.
C P
ENTRAL ROCESSING
G31-M4
U (CPU)
NIT
5