Chapter 2: Hardware Installation; Installing Central Processing Unit (Cpu) - Biostar 945GC-M7 TE Setup Manual

945GC-M7 TE

CHAPTER 2: HARDWARE INSTALLATION

2.1 I C P U (CPU)
NSTALLING ENTRAL ROCESSING NIT
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won't be damaged.
Pin-Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
5