Answering A Video Call - Sharp 880SH User Manual

Answering a Video Call

When an incoming call is detected, the phone rings.
Press D to answer the call with video or press
1.
[Options] and select "Hide Picture" to answer with
voice only.
If the slider is closed, you can answer the call (with
video) by sliding open the phone when the "Calls on
Open" function is enabled.
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller's network
sends the number, the caller's number is displayed on
the screen. If the caller's name and number are saved
in the Contacts List, the caller's name is displayed on
the screen.
Rejecting an Incoming Call
Press F while the phone is ringing to reject a call
1.
you do not wish to answer.
You can reject an incoming call by sliding close
your phone if "Calls on Close" is set to "End Call"
in Slider Settings (p. 140).
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.
In Call Menu (Video Call)
Muting the Microphone
1.
During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub
screens.
1.
During a video call, press [Options] and select
"Switch Images".
Voice Call/Video Call Functions 43