Making A Video Call; Answering A Video Call - Sharp 703SH User Manual

Making a Video Call

Note
• Use this function with only the video call enabled phones.
• Make sure that the battery is fully charged and the signal length is
greater before using this function.
• Turn the loudspeaker on or use a switch-equipped earphone
microphone or handsfree kit so that you can talk while looking at
the video call screen on the main display.
Status Indicators
1. Sub screen for your image
2. Elapsed time (hour:minute:second)
3. Main screen for the calling party's screen
4. Calling party's name
5. Calling party's phone number
Making a Video Call
1.
Enter the area code and the phone number you wish to dial
and press [Options] and select "Video Call" to dial.
If you enter the wrong number, press U to delete the number
to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
• If the called party's phone is not video call enabled, you can press
F and enter the phone number again to make a voice call.
• When the call ends, the last call cost is displayed.

Answering a Video Call

When an incoming call is detected, the phone rings.
1. Press D to answer the call by video or A [Answer] to
answer the voice only.
Tip
• When the call is ended, the call cost is displayed.
• If you have subscribed to the Calling Line Identification (CLI) service
and the caller's network sends the number, the caller's number is
displayed on the screen. If the caller's name and number are saved
in the Contacts List, the caller's name and phone number are
displayed on the screen.
Rejecting an Incoming Call
Press F while the phone is ringing to reject a call you do not
1.
wish to answer.
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a busy tone to
the caller of an incoming call letting them know that you
cannot answer the call.
Voice Call/Video Call Functions 27