Agenda; Memory Status; Calculator - Haier HG-M201 User Manual

User manual
Table of Contents

Advertisement

Date:Refer to the date to be reminded for event, which may be set by entering the date with
number keys;
Time:Refer to the time to be reminded for event, which may be set on the screen of "Time";
Memo:Refer to the description of event, with contents to be input on the screen of edit, refer
to section 1.6;
Period:Refer to the period of event;
Status:Refer to make the schedule item on/off.
10.2.3

Agenda

Simply press Centre to enter schedule list box, which is used to check all schedulers.
Activate the key Options for following operations:
View: to view the content of selected schedule;
Create: to add a new schedule;
Delete: to delete the selected schedule
Delete all: to delete all schedule.
10.2.4

Memory status

Within the status of "Memory status", the total/free number of schedule items is displayed,
and press Back key to back to calendar screen.

10.3 Calculator

Using calculator can do the arithmetic including addition, subtraction, multiplication and
division. After entering the screen of calculator, you may directly input the number to account,
and the number and character input will display on the screen of edit:
Take the calculation of 123456789x7.2 as an example:
First step:enter digits "123456789",and press # to change between positive and negative;
Second step:press operation symbol "x";
Third step:enter digit "7.2",whereby the dot can be made by * ;
Fourth step:press operation symbol "=";
The result will display on the bottom line.
Press Delete key to delete the content on the edit screen and start new calculation, and press
Back key to exit the calculator screen.
Press
key can cancel the input, exit the calculator screen and back to idle screen, or press
Back key to exit after clearing the edit screen.
In case that the calculation of number which is divided by zero produces a result over
zero, or the result is above 999999999 or below -999999999,the prompt "E" shall occur to
indicate an error.
M201
Us
er manual
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

M201

Table of Contents