Table of Contents
Advertisement
Select Delete to delete the existed number and reset the new number.
When setting the new number, using the way of inputting the numbers manually or browsing
the contacts to obtain the desired number, and put it into the specified number key of quick dial for
convenient use. After completing, the mobile phone will automatically determine that the selected
number exists in the phone or not. If strange, only the number is displayed to give you the correct
prompt as possible.
When the number key with the cursor is set as Flash dial, the current icon is fitted and the
bottom of mobile phone will prompt the specified number and contact person; if the cursor does
not exist the specified key of quick dial, the fit does not exist over the number.
8.2.7
Minute reminder
Set up the open or close of minute prompt. If the function is started, there will be minute
prompt in the process of call. If closed, then there is no minute prompt at all.
8.2.8
Connection tone
"Connection tone" is to set the connection prompt on or off. If it is on, there will be
connection prompt in the process of call. If off, then there is no connection prompt at all.
8.3 Security
The menu of "Security" includes the following settings: Call barring, SIM password.
8.3.1
Call barring
The network operators will provide you with a 4-digit password to enable or disable this
function.
Incoming calls:
• When roaming: Reject all incoming calls when roaming.
• Incoming calls: Reject all incoming calls.
Outgoing calls:
• International: All outgoing international calls cannot be dialed out;
• Local calls: Only local calls can be dialed out;
• Outgoing calls: All calls cannot be dialed out.
Cancel all: Cancel all call barring. Need to input correct password (Default value: 1234) to cancel
all.
Modify password: You can change the restriction password provided by the network.
8.3.2
SIM password
"SIM password" is to PIN lock activate/deactivate and the change of PIN code.
PIN lock: to enable PIN code of SIM card. When it is on, you must enter PIN code to power
on or you are only allowed to make 112 emergency calls; to disable PIN code of SIM card. When
it is off, you do not need to enter PIN code to power on.
Change PIN: to change PIN code and set it your accustomed code number. Please notice the
change must be set under the case that PIN code is on.
M201
Us
er manual
34
Advertisement
Table of Contents
