Viking DMOR206SS Installation Instructions Manual page 7

Oven Installation
MOUNTING OVEN TO THE WALL: Using cutting line
around the carton, cut into two pieces (A) and (B).
(B)
MOUNTING OVEN TO THE WALL: Place the oven and
the carton portions together on the top of the range.
Slide carton toward backguard until it stops. Align the
lower back edge of the oven with the mounting plate.
Thread the power supply cord through the hole made in
the bottom of the top cabinet.
(A)
(B)
(B) (B)
MOUNTING OVEN TO THE WALL: Hang the oven on
the lower edge of the mounting plate. Take care that the
power cord is able to clear the edge of the hole as the
oven is rotated upward. (In the case of a non-recessed
bottom in the top cabinet, the hole for the cord may
need to be enlarged.) Remove the carton portions.
(C)
(D)
MOUNTING OVEN TO THE WALL: Tighten the two unit
Mounting Screws located in the grease filter openings.
(C)
(D)
E7
(A)
(B)
Mounting Screws
(C