Tools Recommended For Installation; Installation Hardware; Basic Specifications; Parts Included - Viking DMOR206SS Installation Instructions Manual

Tools Recommended
for Installation
• Phillips Screwdriver
• Electric Drill
• 1/2", 5/8" and 3/32" Drill Bits
• 1½" Wood Bit or Metal Hole Cutter
(if metal cabinet is used)

Installation Hardware

The INSTALLATION HARDWARE (items 1 - 7) packed
with the oven should contain the following:
item Part name & code
Wood Screw 5 X 35 mm
1
Toggle Bolt 3/6 inch
2
Top Cabinet Screw 5 X 60 mm
3
Flat Washer 30 mm diameter
4
XWHS750-16300
Grommet LBSHC0040MRE0
5
Tapping Screw 4 x 12 mm
6
XOTS740P12000
Exhaust Damper Assembly
7
FFTA-B004MRK0

Basic Specifications

description
Overall Width
Overall Height from Bottom
Overall Depth from Rear
Oven Interior
Cutout Width / Height / Depth
Electrical Requirements (Single Phase) UL Rating
Max. Amp Usage
Approx. Shipping Wt.
Quantity
6
XTSS750P35000
4
LX-BZ0195WRE0
2
XBRS750P60000
2
1
4
1

Microwave oven

29-15/16"
16-11/32"
15-9/32"
Width
Height
Microwave UL Rating
Convection UL Rating
71 lbs.
• Saw to cut exhaust opening (if needed)
• Protective Drop Cloth for product and range -
you may also use carton for protection
• Scissors • Measure
• Pencil • Tape

Parts Included

Hardware Kit #5450M023-60
Parts shown not to common scale.
VMoR205/dMoR206
(76.0 cm)
(41.5 cm)
(38.8 cm)
17-1/8" (43.5 cm) Depth
8-1/16" (20.5 cm) Overall
N/A
120VAC/60 Hz CSA Rating 116VAC/60 Hz
1.60 kw 13.2 amps CSA Rating 1.5 kw 13.0 amps
1.60 kw 13.2 amps CSA Rating 1.5 kw 13.0 amps
(32.2 kg)
E3
Use with metal cabinets.
Surround the power cord
opening. Cut to fit.
13-13/16" (35.1 cm)
1.1 cu. ft.