Table of Contents
Advertisement
Using the Adjust menus (Continued)
The Advanced menu
Item p q
Description
Noise
Adjust the screen noise
reduction
reduction level.
*1
Off/Low/Mid/High
3D Y/C
Enbale or disable 3D Y/C
separation
separation.
On/Off
Progressive
Adjust the progressive mode.
Off/Still/Standard/Cinema
Color matrix
Set the default Color matrix.
Auto/RGB/SDTV/HDTV
Film
Set the Film mode.
Off/2-2/2-3 Auto/2-2/2-3
*1: Noise reduction may not work depending on signal type.
Computer 1 Computer 2 Computer 3
Y/P
/P
Video S-video
B
R
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
54
Using the Setting menus
The Setting menu contain the most often used settings during installation and options
to customize the general output of the projector. Three tabs are accessible through the
Setting menu; Setting 1, Setting 2, and Setting 3.
The Setting 1 menu
Yes
No
Item p q
Keystone
Adjust the horizontal/vertical keystone values. Press
Yes
Lamp power Set the lamp power. Press
No
Low/Standard
Lamp mode Set the lamp mode. Press
Yes
Dual/Lamp1/Lamp2
Lamp interval Set the period of time after which the lamp should be swapped when lamp select is not set
to Dual mode. Press
Off/1 week/4 week/2000H
Language
Select one of the languages below to use for displaying the menu and messages
Press
/
Lens Shift
Shift the lens using the projector's control panel.
• Press
• Press p qt u to shift the lens in the corresponding direction.
Use the Zoom feature from the projector's control panel.
Zoom
• Press
• Press t to zoom out and u to zoom in.
Use the Focus feature from the projector's control panel.
Focus
• Press
• Adjust the focus by pressing t and u.
Notes
•
For lamp protection, [Lamp mode] cannot be changed its setting mode right after you
have switched the lamp mode or the lamp has turned on. If it is the case, allow some
time before changing the mode.
Description
and adjust the keystone using t u .
and select the lamp power using p q.
and select the lamp mode using p q.
and select the lamp interval using p q.
and toggle the display language using p q.
/
/
/
/
to display the Len shift window.
to display the Zoom window.
to display the Focus window.
55
/
/ 中文 ( 簡體字 )
Advertisement
Table of Contents
