Advanced Menu - Toshiba TDP-S9 Owner's Manual

Using the menu (Continued)

■ Advanced menu

Use this menu to set the related items.
Item
Auto Source Select
Rear
Ceiling
ECO Mode
Lamp Hours
Color Space
Auto Shutdown
OSD Timeout
Menu Position
Factory Reset
Description
Automatically scans the input source.
Use to apply.
The image is reversed horizontally.
Use to apply.
The image is inverted vertically.
Use to apply.
Uses this function to dim the projector lamp light output which will
lower power consumption and increase lamp life.
ON OFF
* Pressing repeatly will also change on and off.
Displays operating hours since lamp timer reset. Lamp hour
counter is displayed in read-only format, and this setting cannot
be manually adjusted.
Manually selects signal type. It is selectable for RGB input signal
only.
RGB YCbCr
Uses this fnction to automatically turn off the lamp if the projector
does not detect an input signal for specified time period (30
minutes).
ON OFF
Duration on-screen display menu stays active (at idle state in second).
Switch with and
Selects the position of on-screen display menu on the screen.
Switch with and
Resets the projector to its factory default settings.
[Control panel's MENU/ remote control's Enter: Enter its sub-
menu] [ : Select setting]
remote control's Enter: Apply]
: Apply. : Chancel.
32
YPbPr
.
.
[Control panel's MENU/