2. Be sure to place the batteries with correct polarities. Press the battery
down to the stopper then push it forward to fit into the battery case.
1. Stopper
2. Battery
3. Close the battery cover. Press gently until it clicks into place.
Replacing the batteries
When the batteries in the remote controller reach the end of their life, the
remote controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
1. Stopper
2. Battery
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Press gently until it clicks into place.
User's Manual
1
2
Inserting the batteries
Closing the battery cover
1
2
Removing the batteries
The Grand Tour
2-25