Table of Contents
Advertisement
Technical Specifi cations and Hardware
2.1 Confi guring the AOC-SIM1U/SIM1U+ and
the AOC-USB2RJ45 Add-On Cards
The AOC-SIM1U/SIM1U+ Add-On Card is connected to a Dedicated LAN Ethernet
port located on the AOC-USB2RJ45 Add-On Card via an SMC Proprietary cable
(CBL-0165L) for External LAN access. One end of the CBL-0165L cable is con-
nected to the mini USB connector (J3) located on the AOC-SIM1U(+) card and the
other end to that of the AOC-USB2RJ45 card. There are two LEDs located on the
LAN port to indicate network links and activities. Refer to the picture below for the
confi guration.
*Note 1: You can also use LAN1 on the motherboard if you do not need the dedi-
cated LAN support. However, dedicated LAN is recommended for better graphic
support when the KVM feature is used.
*Note 2: The SKT-0240L is included in the SIM1U+ shipping package only.
Mini USB
Connector
Dedicated
Ethernet
(LAN) Port
Chapter 2: Technical Specifi cations and Installation
Chapter 2
Installation
Mini USB
Connector (J3)
CBL-0165L Cable
AOC-USB2RJ45
2-1
AOC-SIM1U(+)
Advertisement
Table of Contents
