Hide Inactive Item; Show History - Supero AOC-1UIPMI-B User Manual

Hide Inactive Item

IPMI View gets predefined sensor information from the mainboard. Some items may
be not installed for different configurations. For example, there will be no CPU fan if
using a passive CPU heat sink, and only one CPU on a dual CPU mainboard that
has only a single CPU installed. The first time the sensors page is shown, IPMI View
will hide inactive items (the default setting) if any. A manager may change this option
later by un-checking the "Hide inactive item" box, as shown in Figure 3-5.

Show History

IPMI View provides a history chart for fans, temperatures and voltages. The yellow
line indicates the reading correspond to sensor. A red line indicates a high or low
limit. A blue line indicates the base value of 0 (zero). Check the "Show History" box
to display these charts, as shown in Figure 3-6.
Figure 3-5
3-25
Chapter 3: Troubleshooting