Sunbeam SCA052MWB1 User Manual page 8

Ins tallation ins truc tions
5. Ins tall the L brackets on the outer s ill with the
s hort s ide of the bracket agains t the back of the
inner s ill. Ins tall one L bracket 7.5
of center line. S ee F ig. 5.
6. C arefully lift the air conditioner and s lide it into
the open window. Make s ure the bottom guide of
the air conditioner drops into the notches of the L
brackets . When the air conditioner drops into the L
brackets , the air conditioner will be centered in window
opening as s how in F ig. 6.
While s teadying the air conditioner, carefully bring
the window s as h down behind the top channel
of the air conditioner, as s hown in F ig. 7.
F irs t, fix both s ides onto the window s ill with two 3/4
s crews and one 2/5 s crew ( which is uns crewed from
each s ide of the unit). T hen fix top channel to widow
s as h with one 3/4 s crew and fix s ide curtain frames
with four 3/4 s crews as s hown in F ig.6.
7. If s torm window pres ents interference, fas ten a
2'' wide wood s trip to the inner window s ill acros s
the full width of the s ill. T he wood s trip s hould be thick
enough to rais e the height of the window s ill s o that
the unit can be ins talled without interference from the
s torm window frame, as s how in F ig. 8.
Top of wood s trip s hould be approximately 3/4'' higher
than the s torm window frame to help condens ation to
drain properly to the outs ide.
Ins tall a s econd wood s trip (approximately 6'' long by
1 ''wide and s ame thicknes s as firs t s trip) in the center
1/2
of the outer s ill flus h agains t the back of the inner s ill.
S crew the L brackets into this s trip.
T his will rais e the L bracket as s hown in F ig. 8.
to each s ide
7
Inner S ill
O uter S ill
3/4'' S crew
B racket
S hort S ide
F ig. 5
3/4 s crew
3/4 s crew
3/4 s crew
Tim e r
Mo d e
Airc o nd itio ne r
F ig. 6
S eal
L B racket
F ig.7
Inner s ill
F ig.8
C enter Line
3/4'' S crew
F oam
3/4 s crew
2/5 s crew
3/4 s crew
3/4 s crew
3/4 s crew
Fa n
About 5
3/4''C learance
S torm window
frame