Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for PITSOS DIS4315
Summary of Contents for PITSOS DIS4315
- Page 1 en Operating instructions Dishwasher...
- Page 2 Reset 3 sec. Start...
-
Page 3: Table Of Contents
en Table of contents Safety instructions ....4 Washing the dishes ....15 Delivery . -
Page 4: Safety Instructions
ã= Safety instructions Warning Knives and other utensils with sharp points Delivery must be placed in the cutlery basket with the points downwards or horizontally on – Check the packaging and dishwasher immediately for damage caused in the knife shelf *. transit. -
Page 5: Damage
Damage Getting to know your – The appliance may be repaired and appliance opened up by a technician only. To do this, disconnect the appliance from the Diagrams of the control panel and the power supply. Pull out the mains plug interior of the appliance can be found in or switch off the fuse. -
Page 6: Water Softening System
Setting Water softening system The amount of salt dispensed can be set in 4 stages depending on the hardness of To ensure good washing results, the your water. Accordingly 0, 1, 2 or 3 dishwasher requires soft water, i.e. displays are lit (see table). Factory setting: containing low amounts of lime, otherwise white limescale will be deposited on the –... -
Page 7: Special Salt
Switching off salt refill indicator/ Special salt water softening system If the salt refill indicator ` is impaired Using special salt (e.g. when using combined detergents Always refill with special salt immediately containing salt component), it can be before switching on the appliance. This switched off. -
Page 8: Rinse Aid
Setting amount of rinse aid Rinse aid The amount of rinse aid dispensed can be set in 4 stages. Accordingly 0, 1, 2 or 3 As soon as the rinse-aid refill indicator X displays are lit (see water hardness table). is lit on the fascia, there is still a rinse-aid Factory setting: 2. -
Page 9: Utensils
Unloading the dishwasher Utensils To prevent water from dripping off the upper basket onto the utensils in the lower Not suitable basket, it is recommended to empty – Cutlery and utensils made of wood. the appliance from the bottom up. –... -
Page 10: Cutlery Basket
Cup support clip * Heavily soiled utensils (pans) should * depending on model be placed in the bottom basket. The more When washing cups, the cup support clip powerful spray jet provides a better can be folded up. The additional inclined dishwashing result. -
Page 11: Knife Shelf
Knife shelf * Top basket with side levers – Pull out the top basket 1" out. * depending on model Long knives and other utensils can be – To lower the basket, press in the left arranged horizontally. and then the right lever on the outside of the basket. -
Page 12: Detergent
Adding detergent Detergent – If the detergent dispenser 9" is still closed, press the lock 9* to open the You can use tablets as well as powder detergent dispenser. or liquid detergents for dishwashers, but Pour detergent into the dry detergent never use washing up liquid. -
Page 13: Combination Detergent
Notes If the utensils are only lightly soiled, slightly – You will obtain optimum rinsing less than the indicated amount and drying results by using solo of detergent is usually adequate. detergents and applying salt and rinse aid separately. Suitable detergents and care products can be purchased online via our website –... -
Page 14: Overview Of Programmes
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options Prerinse very adhesive burned- Clean 70°... -
Page 15: Additional Options
Additional options Washing the dishes Programme data * depending on model Additional options can be set with the The programme data (consumption buttons P. values) can be found in the summary of instructions. This data refers to normal Ÿ Express Wash * conditions and the water hardness set value 2. -
Page 16: End Of Programme
End of programme Intensive drying The programme has ended when the End The final rinse uses a higher temperature display )" is lit. which improves the drying result. The running time may increase slightly. Switching off the appliance (Caution if utensils are delicate!) Short time after the end of the programme: –... -
Page 17: Maintenance And Care
Filters Maintenance and care The filters 1R keep large foreign objects in the rinsing water away from the pump. A regular inspection and maintenance of These foreign objects may occasionally your machine will help to prevent faults. block the filters. This saves time and prevents problems. -
Page 18: Spray Arms
Spray arms Waste water pump Limescale and contaminants in the rinsing Large food remnants in the rinsing water water may block nozzles and bearings on not retained by the filters may block the the spray arms 1: and 1B. waste water pump. The rinsing water is then not pumped out and covers the filter. -
Page 19: Troubleshooting
“Check water supply” display h lights Troubleshooting – Tap turned off. The majority of faults which could occur in – Water supply interrupted. daily operation can be rectified by the – Supply hose kinked. user. This ensures that the appliance is quickly available for use again. -
Page 20: During The Wash Cycle
Refill indicator for special salt ` is lit. White stains on the utensils/glasses remain milky. – No salt. If phosphate-free detergents are used with Refill with special salt. hard tap water, white deposits may be – Sensor does not detect salt tablets. deposited more easily on utensils and Use different special salt. -
Page 21: Customer Service
Customer service If the advice given does not resolve your problem, please contact your customer service. Contact details can be found on the back cover of this instruction manual or in the enclosed customer service list. When calling , please quote the appliance number (1) and the production date (FD = 2) which can be found on the rating plate 92 on the appliance door. -
Page 22: Installation
– After installing the appliance, ensure Installation that the plug is easily accessible. – Some models: The dishwasher must be connected The plastic housing on the water correctly, otherwise it will not function connection contains an electric valve, properly. The specifications for the inlet the connecting cables are in the supply and outlet as well as the electrical hose. -
Page 23: Installation
Installation Water pressure: at least 0.05 MPa (0.5 bar), maximum The required installation dimensions can 1 MPa (10 bar). At a higher water be found in the installation instructions. pressure: connect pressure-reducing valve Level the appliance with the aid of the ahead. -
Page 24: Transportation
Transportation Waste disposal Empty the dishwasher and secure loose parts. Both the packaging of new appliances and Drain the appliance according to the the old appliances themselves contain following steps: valuable raw materials and recyclable materials. – Turn on the tap. Please dispose of the individual parts –... - Page 25 Childproof lock (door lock) * 40 Activate the childproof lock. Always close the appliance door completely 41 Open the door with activated when you leave the appliance. childproof lock. This is the only way you can protect your 42 Deactivate childproof lock. children from potential dangers.
- Page 26 Pitsos BSH Ikakes Syskeves A.B.E. 17th km Ethnikis odou Athinon - Lamias & Potamou 20 145 64 Kifisia, Athens Internet: http://www.pitsos.gr 9000 510 606 en (8906) To contact us directly, use the tel. no or fax no. in the 640EA...