Page of 2
Download Bookmark Comment

PITSOS DGS5512 - annexe 2 Overview

Brief and handy:
en
everything your dishwasher
needs ...
Before using for the first
time, read the operating
instructions!
Filling the salt dispenser
Adding rinse aid
Adding detergent
Switching on the appliance
Select programme
Start programme Here we go ...
Switch off the appliance Everything o.k. ...
Adjusting the water softening system *
Ask your water supply
Water
Hardness
mmol/l
hardness
range
company what the
value _dH
water hardness is
and enter ...
soft
soft
medium
medium
medium
* only before the first
hard
wash or if the water
hard
hardness has been
hard
changed
Dissolves limescale (not necessary for set value 0 !) ...
Unscrew
cover.
Spick and span ...
Press mark 1,
lift up cover 2.
A lot of dirt, a lot of detergent ...
If required, open
Attention
the cover (press
Combination
button).
products are not
suitable for all
programmes, follow
manufacturer's
instructions.
Quick, economical or intensive ...
Overview of programmes
The max. possible number of programmes is illustrated
in this overview. The corresponding programmes for your
appliance can be found on the fascia.
The programme data has been measured in the laboratory
according to European standard EN 50242.
Deviations are possible in practice.
*
half normal load
Additional options **
Express Wash
Half load
(VarioSpeed)
... for a few items, saves
... is obtained by
water, energy and time
increased energy
consumption at a
constant cleaning and
drying performance.
** depending on model
Quickly sorted ...
How to adjust the water softening system
Set
value
– Switch on ON/OFF switch.
A B
– Press and hold down the Start button A.
– Rotate programme selector B until H:0. is indicated on the digital
display.
– Release button.
The factory-set value H:04 is lit on the digital display.
– Rotate programme selector B until the required value is indicated
on the digital display.
– Press Start button A.
The set value is saved.
Fill the salt
dispenser with
water before the
first wash only.
Refill if rinse-aid refill indicator is lit!
Intensive
Normal
70_
65_
Duration: hs/mins
2:15
2:00
Energy Consumption: kWh
1,50
1,45
Water consumption in litres
15
14
Flexibility ...
IntensiveZone
... perfect for a mixed
load. Washing pressure
and washing
temperature are
increased slightly.
Add salt
Screw on the
(never add
cover. Wash
detergent!).
immediately.
Adding
Screw on
rinse aid.
the cover.
CLICK!
Adding
Slide cover
detergent.
shut, press.
PLOP!
Eco
Gentle
Quick
50_
40_
45_
*
2:20
1:10
0:29
1,05
0,80
0,80
12
13
10
Hygiene
Extra drying
... The temperature is
... improves the drying
increased during
result by increased
the rinsing process. This
temperature in the final
increases the hygiene
rinse (Please take care
status.
with delicate dishes)
Prerinse
0:15
0,05
4

   Summary of Contents for PITSOS DGS5512 - annexe 2

  • Page 1

    Adjusting the water softening system * Quickly sorted ... Brief and handy: everything your dishwasher How to adjust the water softening system Ask your water supply Water Hardness mmol/l needs ... hardness range value company what the – Switch on ON/OFF switch. Before using for the first value _dH water hardness is...

  • Page 2

    Maintenance and care Cleaning waste water pump For perfect rinsing results ... – Pull out the mains plug Filters ... Rotate filter rinse under insert ... Screw on filter – Remove filters and scoop out water cylinder, remove running water ... system NOTE check, if –...

This manual also for:

Dis5505 - annexe 2

Comments to this Manuals

Symbols: 0
Latest comments: