NAIM CDX2 - CD5 Manual page 8

CD5
9.1 CD5 Rear
power mains input
Note
The RC5 input fitted to the CD5 is intended to accept external control
signals for multi-room applications. Contact your dealer for further
information on its use.
The CD5 features various technologies to reduce microphonic effects, in
particular a compliant mounting for the main circuit boards and the DIN
sockets on the rear. Some movement of the board and sockets when
connecting/disconnecting is normal.
9.2 CD5 Connected to Flatcap 2 Power Supply
power mains input
power mains input
RC5 input
CD5
Flatcap 2
link plug fitted
to preamplifier
ch1
out
ch 2
out
Interconnect Cables
cable
direction
240° 5 to 5 pin DIN
marker
180° 5 to 5 pin DIN
link plug removed
CD5 Output
nc
nc
-ve
7