NAIM CDX2 - CD5 Manual page 6

CDX2
7.1 CDX2 Rear
power mains
input
Note
The RC5 input fitted to the CDX2 is intended to accept
external control signals for multi-room applications. Contact
your dealer for further information on their use.
7.2 CDX2 Connected to XPS Power Supply
CDX2
XPS
mains input
Note
When used with an XPS the CDX2 must be disconnected
from the mains. Always switch off the CDX2 when
connecting or disconnecting an XPS.
optional RC5 input
RS232
data port
link plug fitted alternative
RCA phono
output sockets
cable
direction
marker
180° 5 to 5 pin DIN
to preamplifier
CDX2 Output
ch1
out
nc
ch 2 nc
out
-ve
Interconnect Cables
CDX2/XPS Burndy
5