NAIM CD5 XS Manual page 18

N ARCOM 4 H a nds e t
21 narC om 4 H a nd set
The narCom 4 is a multi-functional remote control handset designed to be used with
naim audio CD players, integrated amplifiers, preamplifiers, preset tuners and subwoofers.
To fit batteries, remove the battery cover and insert the batteries into the body taking care
with their orientation. replace the battery cover.
21 . 1 using na rC o m
Operation of the NARCOM handset is based around three
types of keys: system Component
soft Keys.
system Component Keys
soft Keys
the into modes appropriate to each system
component (CD player, preamplifier, etc.).
Global Keys operate specific component functions
regardless of the
available at all times.
CD player Global Keys
prev
Selects the previous track or index point.
next
Selects the next track or index point.
stop Stops cd play.
play Begins cd play.
fwd Fast forwards the cd.
rev Fast reverses the cd.
rpt Repeats the cd or programmed tracks.
pause Pauses the cd.
soft Keys keys operate, in CD mode (selected by the
system Component
numeric:
Directly selects tracks or, with the
tracks for play order programming.
prog:
Confirms CD track play order selections.
disp: Scrolls through the display options of track, time
and display off.
21 . 2 P la y o rde r P ro gr a mm in g
To program a play order select a track number from the
numeric keys
followed by the
selection is complete. During selection, the track number
indicated in the player display will be followed by either
P —
or or no display.
—
selected, indicates that the track can be selected.
The prog key can also be used to delete tracks from a play
order. To delete a track, press and hold the
the prog indicator in the CD display illuminates then delete
the track or tracks using the
time by a further operation of the
the track number indicated in the player display will be
followed by either
track is already deleted,
deleted while no display indicates that this is the only track
remaining and therefore cannot be deleted.
e16
Keys, Global Keys
keys switch the operation of
system Component Key setting and are
operate as follows:
Keys), as follows:
prog
prog
key until the desired
P
indicates that the track is already
prog
numeric keys followed each
prog key. During deletion
C — C
or or no display. indicates that the
—
indicates that the track can be
The CD player can be programmed with a random play
order (from stop with no play order already in place) by
pressing prog
and
play order, press
Play orders can be reviewed by pressing
player is either stopped or playing. The player display will
then scroll through the selected tracks. The prog indicator
on the player display will illuminate when a play order has
been programmed. To clear the program memory press
and hold the
2 1 . 3 n a rC o m 4 K e ys
key, selects
key until
followed by 1. Similarly, to program a reverse
prog followed by 2.
prog
stop
key.
Disp Key (Soft)
Numeric keys (Soft)
System Component Keys
Global Keys (CD)
Volume and mute keys
Prog Key (Soft)
while the