NAIM CD5 - ISSUE 2 Manual page 19

Flash Handset
TUN (tuner mode)
Page 1 of 1
up Depending on the operational mode selected,
adjusts the tuning frequency upwards
(frequency mode),
the FM band
station preset
down Controls the tuner in a similar manner to the
up
prog Selects preset program mode that enables
specific FM stations to be assigned to preset
memory.
disp Switches the tuner display on or off.
mono Combines the left and right channels
and may improve reception on weak signals.
mode Selects frequency,
numeric Directly select station presets.
AV (av processor mode)
Page 1 of 3
input+ Selects the next input.
input- Selects the previous input.
mode- Selects the previous decode mode.
mode+ Selects the next decode mode.
osd Selects On Screen Display operational mode
and shows current system status.
disp Switches the processor display on and off.
midn Selects
menu Used in setup mode.
numeric Directly selects processor inputs.
Page 2 of 3
The master key functions on AV Page Two are duplicates of
Page One. However, selection of Page Two switches the
function of the numeric keys to direct selection of
processor decode modes.
Page 3 of 3
up Selects the previous AV setup parameter or
moves the OSD cursor upwards.
down Selects the next AV setup parameter or moves
the OSD cursor downwards.
left Selects the previous AV parameter value or
moves the OSD cursor to the left.
right Selects the next AV parameter value or moves
the OSD cursor to the right.
input Switches the AV processor into input setup
mode.
spkr Switches the AV processor into speaker setup
mode.
enter Confirms option selection during OSD control.
clear Clears option selection during OSD control.
numeric No function.
18
searches for stations up
(scan mode) or selects the next
(preset mode).
key.
scan and preset
midnight operational mode.
15.3 cd track programming
In CD mode the
specific CD tracks and their play order to be programmed.
To program a play order select a track number from the
numeric keypad followed by the
selection is complete. During selection, the track number
indicated in the player display will be followed by either
— P
or . indicates that the track is already selected,
indicates that the track can be selected.
The prog key can also be used to delete tracks from a play
order. To delete a track, press and hold the
the prog indicator in the CD display illuminates then delete
the track or tracks using the
time by a further operation of the
the track number indicated in the player display will be
modes.
followed by either
track is already deleted,
deleted while no display indicates that this is the only track
remaining and therefore cannot be deleted.
The CD player can be programmed with a random play
order (from stop with no play order already in place) by
pressing prog
play order, press
Play orders can be reviewed by pressing
player is either stopped or playing. The player display will
then scroll through the selected tracks. The prog indicator
on the player display will illuminate when a play order has
been programmed. To clear the program memory press and
hold the stop
prog key (display Page Two) enables
prog key until the desired
numeric keypad followed each
prog key. During deletion
C or — or no display. C indicates that the
—
indicates that the track can be
followed by 1. Similarly, to program a reverse
prog followed by 2.
prog
key.
P
—
prog key until
while the