Operating Netcommand-Controlled Devices - Mitsubishi Electric LDTV152 - 52IN LCDtv 1920X1080 10000:1 S-vid Comp-vid USB Owner's Manual

58
6. NetCommand IR Control
Operating Net Command-Controlled Devices
Controlling Most Device Types
As an example of NetCommand control, if you are watch-
ing your cable box and you wish to tune to the next
channel higher, press CH/PAGE
the "learned" channel-up control signal to the cable box.
1.
With an IR emitter properly positioned in front of the
device, use the Inputs > Learn screen to perform
NetCommand setup for the device.
2.
When you wish to use the device, press
display the Input Selection menu.
3.
Press to highlight the icon for the device.
4.
Press ENTER to switch the TV to the device.
Note: if you have set up automatic input switching for the
A/V receiver, the A/V receiver will automatically
switch to the correct input for the device.
5.
To operate the device using the
control, set the slide switch to the TV position.
6.
Point the remote control at the
and press the key for the desired function.
S pecial Operation Methods
Key Name in
Special Operation Description and Setup
Learning Screen
Power On Manual Power On/Off
Use for devices that have only one POWER key.
Power On Automatic Power On/Off
This feature is only for devices that have separate
Power Off
POWER ON and POWER OFF keys on their original remote
controls. If your device does not have a separate
POWER OFF key, do not use the Power Off learn-
ing position; use only the Manual Power ON/OFF
method described above.
In the NetCommand Learn screen:
a. "Learn" the Power On command in the Power
On learning position.
b. "Learn" the Power Off command in the
Power Off learning position.
Menu Displaying the Menu for a Device
. NetCommand then sends
INPUT to
TV's remote
TV (not the device)
Controlling an A/V Receiver
See page 60 to set up control of an A/V receiver.
Switching Audio to and from the A/V Receiver
1.
Press AUDIO.
2.
Press to show the Speakers option.
3.
Press to select either AV Receiver or TV.
Controlling A/V Receiver Power
1.
Press AUDIO.
2.
Press to show the Speakers option.
3.
Press to select AV Receiver.
4.
Point the remote control at the
and press POWER to power the A/V receiver on or off.
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the
TV's remote operates the volume and mute functions.
Also, when you switch to a device in the Input Selec-
tion menu, the A/V receiver automatically switches to
the correct audio input for the device.
How to Use
1. Press INPUT to display the Input Selection
menu.
2. Press
device to be powered on or off.
3. With the Input Selection menu still displayed,
press POWER to send the power signal; you may
need to press POWER twice.
Note: If you press POWER without the Input Se-
lection menu displayed, the TV will turn
off.
4. Press ENTER to switch the TV to the device.
• To Power On the Device
1. Press INPUT to display the Input Selection
menu.
2. Press
the device to be powered on or off.
3. Press ENTER to switch the TV to the device
and NetCommand will send the Power
On command to the device.
• To Power Off the Device
When you turn the TV off, the TV sends all
learned Power Off commands to all devices.
1. While watching a device, press
the Input Selection menu with the device
icon highlighted.
2. Press MENU to send the menu signal to the
device. The Input Selection menu will auto-
matically clear from the screen.
TV (not the A/V receiver)
to highlight the icon for the
to highlight the icon for
INPUT to display