Using A Cablecard - Mitsubishi Electric LDTV152 - 52IN LCDtv 1920X1080 10000:1 S-vid Comp-vid USB Owner's Manual

20
2. TV Setup

Using a CableCARD

The CableCARD™ system allows your TV to receive,
decode, and unscramble the premium digital channels
included in your cable TV subscription without the use
of a cable box. The system is unidirectional, meaning
that certain digital cable services, such as requests
for video-on-demand and pay-per-view programs, a
cable operator's enhanced program guide, and data-
enhanced television services may require use of a
set-top box instead. For more information, call your
local cable operator.
Note: CableCARD requires the TV's Fast Power On
setting. If you insert a CableCARD, the TV will
automatically override a Low Power setting and
change to the Fast Power On setting.
Installing a CableCARD
1.
Connect your primary incoming cable to
on the back of the TV.
2.
Power on the TV.
3.
Insert the CableCARD
into the CableCARD
slot with the front of
the card oriented as
shown in the diagram
below.
4.
Wait a few moments while the CableCARD initial-
izes. A message will display on screen when initial-
ization is complete.
Displaying CableCARD Information
To display information needed by your service provider
to start cable service, press MENU and when the Main
menu appears, press 9 9 9.
ANT1/MAIN
TV main panel
HDMI HDMI
4 4
3 3
2 2
1 1
IR- IR- NetCommand NetCommand
S-VIDEO S-VIDEO
Output / External Output / External
Controller Input Controller Input
INPUT3 INPUT3
Pr Pr
VIDEO VIDEO
L L Pb Pb b
ANT1/MAIN
AUDIO AUDIO
R R
Y Y Y / VIDEO Y / VIDE Y O
DVI/PC DVI/PC
L L L L
AUDIO AUDIO
AUDIO AUDIO
R R
R R
INPUT2 INPUT2 INPUT2 2 INPUT2 INPUT1 INPUT1 INPUT1 INPUT1
DIGITAL DIGITAL T T
AUDIO AUDIO
OUTPUT OUTPUT
L L L R R
A A AUDIO AVR AVR AUDIO
OUTPUT OUTPUT
ANT2/AUX ANT2/AUX ANT1/MAIN ANT1/MAIN
To ANT 1
In order to start cable
service for this device, please contact
your cable provider
1-800-xxx-xxxx
CableCARD(tm): xxx-xxx-xxx-xxx-xxx-x
Host: xxx-xxx-xxx-xxx-x
Data: xxx-xxx-xxx-xx
UnitAddress: xx-xxxxx-xxxxx-xxx
Press EXIT to exit.
Sample CableCARD information screen. Write down
the information before contacting your cable provider.
CableCARD Menu
CableCARD menu
Network Setup
CableCARD(tm) Status
CableCARD(tm) Pairing
Conditional Access
Sample CableCARD menu
To display the CableCARD menu with links to applica-
tions from your cable provider:
1.
While watching CableCARD, press
Input Selection menu.
2.
With the CableCARD icon highlighted, press
open the CableCARD menu.
3.
Press to highlight a link, then press ENTER to
access the linked page.
4.
To redisplay the CableCARD menu, repeat steps 1
and 2.
5.
Press EXIT to return to TV viewing.
If there are technical problems with the CableCARD, an
error screen automatically displays with information that
may be needed by your cable provider when you call
them for assistance.
Moving Through Other CableCARD Screens
In addition to CableCARD menus, other CableCARD
application screens may display and require you to
make additional selections. When using these screens
on your Mitsubishi television:
• Blue text denotes a function. Press
the function.
• You cannot move backward through the links. To
exit the CableCARD system, press EXIT. The CANCEL
key may not work with some CableCARD screens.
Contact your cable provider if you have any problems
with the application screen displays.
INPUT to open the
MENU to
ENTER to perform