Table of Contents
Advertisement
36
4. TV Operation and Features
Slide Show
Use these keys during the slide show:
Keys for JPEG Picture Slide Show
Begin or resume slide show playback
Pause or resume playback while in auto-
matic advance mode.
Advance to the next slide.
or
ENTER
Go to the previous slide.
FORMAT
Rotate the slide clockwise in 90˚ incre-
ments (personal photos only).
Stop slide show and display the USB Photo
menu.
INFO
Display status for the viewing device and
current image (personal photos only).
INPUT
Display the Input Selection menu.
MENU
Display or remove the TV Main menu.
Note: Always press
back before disconnecting from the USB Photo
port.
Media Setup Menu
In the Media Setup menu you can adjust the slide show
display, number of repetitions, or display interval.
•
Select either Auto or Manual advance. During
manual operation, press
the next slide.
•
For automatic advance, select the time interval for
display of each slide. The interval you select here is
the minimum time between slides; actual time may
be longer for larger files.
•
For automatic advance, select the number of times
(frequency) to play the complete slide show: Once,
Twice, or Continuous.
•
Press EXIT to close the Media Setup menu and
return to the USB Photo menu.
IMPORTANT
The TV can read JPEG photo files as created by
the camera. If you edit a photo file on a computer
and resave the image, the TV may be unable to
read the resaved file.
(STOP) to stop slide show play-
Media Setup menu
or ENTER to advance to
USB Photo Menu Compatible Picture Files
•
Still images recorded on digital cameras using the
Exchangeable Image File Format, version 2.1 (EXIF
2.1) standard for digital still cameras and Design
Rules for Camera File Systems version 1.0 (DCF 1.0)
•
Some images opened and resaved on a computer
may not play back or may not display in the thumb-
nail list. This happens if the files were resaved in an
incompatible format.
•
Full path file names can be no longer than 50 char-
acters and must end in a .jpg extension. Only the
first 20 of the 50 characters will display.
•
Images on storage devices with a capacity of over
256 MB can take a longer initial time to display.
•
The storage device must use the FAT/FAT32 files
system.
Camera Photos and Moving Video as
C omposite Video
Connect the camera to the TV using a composite video
cable if:
•
You are unable to see images using the USB photo
port.
•
You wish to view moving video from the camera.
The TV's USB Photo menu will be unavailable and
you must control the slide show through the camera.
Display resolution is standard-definition (480i).
1.
Refer to the owner's manual supplied with the
camera for instructions needed for this setup.
2.
Set the camera's output signal type to
put the camera into playback mode.
3.
With the camera still turned on, connect your digital
camera's composite video cable (usually yellow) to
the VIDEO/Y jack on the TV. To hear audio, connect
the camera's audio output cable to the AUDIO L
jack.
4.
When the
Auto Input Sensing screen displays,
press EXIT or assign the name Camcorder.
5.
Press
INPUT to display the Input Selection menu.
6.
Highlight the icon for the camera input and press
ENTER.
7.
If viewing photos,
advance through
the images manu-
ally or set the
camera to advance
automatically.
Camera connection
using a composite
video cable
NTSC and
INPUT 4
INPUT 4
Pr
Pr
Pb
Pb
Y/
Y/
Y/
VIDEO
VIDEO
VIDEO
R
R
L
L
L
USB
USB
- Quick Links:
- Remote Control
Hide quick links:
Advertisement
Table of Contents
