Position; Trip Meter - Nokia MU-43 User Manual

natural obstacles, are ignored. Differences in altitude are
not taken into account when calculating the distance.
Route guidance is active only when you move.
To set your trip destination, select
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. To clear the
destination, select Stop navigation.

Position

To save your location as a landmark, select
Applications > GPS data
position.

Trip meter

To activate trip distance calculation, select
Applications > GPS data
Start. To deactivate it, select
calculated values remain on the display.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Reset. To set the odometer and total time to zero,
select Restart.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
Options > Set
>
> Position > Options > Save
>
> Trip distance > Options
Options > Stop. The
>
Copyright © 2009 Nokia. All rights reserved.
P o s i t i o n i n g
37