Table of Contents
Advertisement
3 Push the card gently to lock it into place. Close tight
the slot door (3).
Remove a memory card
Important: Do not remove the memory card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well
as the device, and data stored on the card may be
corrupted.
1 Press briefly the power key.
2 Scroll to
Remove memory
3 Open the memory card slot door.
4 Push the card gently to release it.
5 Pull the card out, and select OK.
6 Close the slot door.
Charge the battery
1 Connect the charger to the wall socket.
2 Connect the charger plug to the charger connector in
the device.
card, and select
OK
> Yes.
If the battery is
completely discharged,
it may take a few
minutes before the
charging indicator
appears on the display
or before any calls can
be made.
The charging time
depends on the charger and the battery used.
Switch the device on and off
Press and hold the power key.
If the device asks for a PIN code, enter the
PIN code, and select OK.
If the device asks for the lock code, enter the
lock code, and select OK. The factory setting
for the lock code is 12345.
For more information about access codes,
see
"Access codes",
p. 20.
To set the correct time zone, time, and date,
select the country you are presently in, then enter the local
time and date. See also
"Clock",
Copyright © 2009 Nokia. All rights reserved.
G e t s t a r t e d
p. 66.
13
Advertisement
Table of Contents
