Gps Light; Status Light; Screen Saver - Nokia MU-43 User Manual

Y o u r d e v i c e
— You have unread messages in the inbox in
Messaging.
— You received new e-mail in your remote mailbox.
— You have messages waiting to be sent in outbox.
— You have missed calls.
— Ringing type is set to
and E-mail alert tone are set to Off.
— The device keypad is locked.
— The loudspeaker is activated.
— An alarm is active.
— All calls to the device are diverted to another
number.
or — A headset or a loopset is connected to the
device.
or or — A GPRS packet data connection is active,
the connection is on hold, or a connection is available.
or or — A packet data connection is active in a part
of the network that supports EGPRS; the connection is on
hold; a connection is available. Your device may not use
EGPRS in the data transfer.
or or — A UMTS packet data connection is active;
the connection is on hold; a connection is available.
or — Bluetooth connectivity is switched on; data is
being transmitted using Bluetooth technology.
18
Copyright © 2009 Nokia. All rights reserved.
Silent and Message alert tone
— A USB connection is active.
Other indicators may also be shown.

GPS light

The GPS light blinks when your device is trying to establish
a GPS connection, and remains on when the GPS
connection is established.

Status light

You can set the light around the scroll key to blink slowly
to indicate when the device is switched on. The light turns
on for a few second at intervals of approximately 20
seconds. To indicate missed events, the light blinks faster
for an hour after the missed event.
To activate the status light, select
sett. > General > Personalisation
Status light > On.

Screen saver

To set the screen saver settings, select
Phone sett. > General > Personalisation
Screen saver. To set the timeout period after which the
screen saver is activated, select
set for how long the screen saver is active, select
saver duration.
> Settings > Phone
> Standby mode >
> Settings >
> Display >
Screen saver time-out. To
Screen