Entry Into The Maintenance Mode - Brother FAX-750 Service Manual

1. ENTRY INTO THE MAINTENANCE MODE

FAX750/FAX770/FAX870MC/MFC970MC:
maintenance mode, press the Function, *, 2, 8, 6, and 4 keys in this order.
FAX-910/FAX-920/FAX-921/FAX-930/FAX-931/MFC-925: To make the facsimile equipment enter
the maintenance mode, press the Menu, *, 2, 8, 6, and 4 keys in this order.
The equipment beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the
equipment is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 2, enter the corresponding 2-
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in Section 3.)
NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the
• Pressing the Stop button after entering only one digit restores the equipment to the
• If an invalid function code is entered, the equipment resumes the initial stage of the
• The 98-year model displays "
equipment exit from the maintenance mode, restoring it to the standby state.
initial stage of the maintenance mode.
maintenance mode.
"
To make the facsimile equipment enter the
Within 2 seconds
Within 2 seconds
."
V - 1
" on the
"; the earlier models display