Connecting A Bluetooth Audio Player - Pioneer FH-P800BT - Premier Radio / CD Operation Manual

Operating this unit
Even though your audio player does not con-
tain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless technol-
ogy using a Bluetooth adapter (sold sepa-
rately).
1 Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
Connecting a Bluetooth audio
player
! Before you can use audio players you may
need to enter the PIN code into this unit. If
your player requires a PIN code to establish
a connection, look for the code on the
player or in its accompanying documenta-
tion. Refer to Entering PIN code for Blue-
tooth wireless connection on page 51.
Using a Bluetooth audio player to
initiate a connection
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
BT AUDIO DEVICE.
# If there is previous connection log in this unit,
you can select the Bluetooth device from
PAIRED DEVICE.
Refer to Connecting a paired Bluetooth audio
player.
4 Use MULTI-CONTROL to select a group.
Push MULTI-CONTROL up or down to select a
group.
NOKIA (Nokia)—STANDARD (standard)
# Normally select STANDARD. If the device of
Nokia is not paired to this unit, select NOKIA.
# Push MULTI-CONTROL left or right to display
a group name or an ID.
5 Press MULTI-CONTROL to open the con-
nection.
READY will be displayed.
This unit is now on standby for connection
from Bluetooth audio player.
# Push MULTI-CONTROL left or right to display
the device name, BD address and PIN code of
this unit.
6 Use your Bluetooth audio player to es-
tablish connection.
PIN code is set to 0000 as the default. You can
change this code in the initial setting. Refer to
Entering PIN code for Bluetooth wireless con-
nection on page 51.
While connecting, CONNECTING is displayed.
If the connection is established, CONNECTED
is displayed.
# If the connection fails, ERROR is displayed. In
this case, try again from the beginning.
Connecting a paired Bluetooth audio
player
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
PAIRED DEVICE.
Paired device name will be displayed.
# Push MULTI-CONTROL left or right to switch
the device name, BD address, group name and
group ID.
Section
02
27
En