Pioneer Premier FH-P800BT Installation Manual page 2

Connecting the unit English
When not connecting a rear speaker lead to a subwoofer
Microphone input
This product
Front output
Rear output
Subwoofer output
14 cm (5-1/2 in.)
Antenna jack
Fuse (10 A)
IP-BUS input (Blue)
Multi-CD player
(sold separately)
IP-BUS cable
USB cable
Connect to separately sold
USB device.
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
1.5 m (4 ft. 11 in.)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
White Gray
Front speaker
When connecting speakers
without using the internal
White/black Gray/black
Left
amplifier, we recommend
Green Violet
that this unit's internal amp
is turned off. For more
Rear speaker
details, refer to operation
manual.
Green/black Violet/black
Connecting the unit
Microphone
4 m (13 ft. 1n.)
AUX jack (3.5 ø)
Use a stereo mini
To rear output
plug cable to connect Connect with RCA cables
with auxiliary device.
(sold separately)
Wired remote input
To front output
Hard-wired remote control adaptor
can be connected (sold separately).
To subwoofer
iPod
output
Dock connector
System remote control
50 cm (20 in.)
Blue/white
Connect to system control terminal of the power
Interface cable
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Subwoofer
Front speaker
Front speaker
Right
Rear speaker
Rear speaker
English Connecting the unit
When using a subwoofer without using the optional amplifier
Front output
Rear output
Subwoofer output
Power amp
(sold separately)
Antenna jack
Power amp
(sold separately)
IP-BUS input (Blue)
Power amp
(sold separately) Multi-CD player
(sold separately)
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Subwoofer
Black (chassis ground)
Connect to a clean, paint-free metal location.
Front speaker
Note:
Change the initial setting of this unit (refer to the Operation
Rear speaker
Manual). The subwoofer output of this unit is monaural.
English Connecting the unit
Microphone
Microphone input
This product
4 m (13 ft. 1n.)
14 cm (5-1/2 in.)
AUX jack (3.5 ø)
Use a stereo mini
plug cable to connect
with auxiliary device.
Wired remote input
Fuse (10 A)
Hard-wired remote control adaptor can
be connected (sold separately).
IP-BUS cable
1.5 m (4 ft. 11 in.)
USB cable
Connect to separately sold USB device.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).

Front speaker

Left

Subwoofer (4 Ω)

When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Not used.
English
iPod
Dock connector
50 cm (20 in.)
Interface cable
White Gray

Front speaker

White/black Gray/black Right
Green Violet

Subwoofer (4 Ω)

Green/black Violet/black

Green Violet
Subwoofer
(4 Ω) × 2

Green/black Violet/black