Other Functions - Pioneer DEH-P7400HD Owner's Manual

Section
Operating this unit
02
! This function is not available for DEH-P8400BH.
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to enter a
PIN code on your phone to verify the connection.
The default code is 0000, but you can change it
with this function.
With some Bluetooth audio players, you may be
required to enter the Bluetooth audio player PIN
code in advance to set this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1 Turn M.C. to select a number.
2 Press M.C. to move the cursor to the previous
or next position.
3 After entering the PIN code (up to eight digits),
press and hold down M.C.
The PIN code can be stored in the memory.
! Pressing M.C. again on the same display
returns you to the PIN code input display to
allow you to change the PIN code.
BT Version info. (Bluetooth version display)
! This function is available on the DEH-P7400HD
only when a Bluetooth adapter (e.g. CD-BTB200)
is connected to the device.
You can display the system versions of this unit
and of Bluetooth module.
1 Press M.C. to display the information.
! Turning M.C. or LEVER cycles between the
system version of this unit and that of the
Bluetooth module.
16
En
S/W UPDATE (updating the software)
! This function is not available for DEH-P7400HD.
This function is used to update this unit with the
latest software. For information on the software
and updating, refer to our website.
! Never turn the unit off while the software is
being updated.
1 Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish up-
dating the software.

Other functions

Using an AUX source
Up to two auxiliary devices such as VCR or port-
able devices (sold separately) can be connected
to this unit. When connected, auxiliary devices
are automatically read as AUX sources and as-
signed to AUX1 or AUX2. The relationship be-
tween AUX1 and AUX2 sources is explained
below.
About AUX1 and AUX2
There are two methods to connect auxiliary devi-
ces to this unit.
AUX1 source:
When connecting auxiliary device using a stereo
mini plug cable
% Insert the stereo mini plug into the AUX
input jack.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
Operating this unit
AUX2 source:
When connecting an auxiliary device using an IP-
BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately) to
connect this unit to an auxiliary device fea-
turing RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
This auxiliary device is automatically set to
AUX2.
# This type of connection can only be made if the
auxiliary device has RCA outputs.
Selecting AUX as the source
% Press SRC/OFF to select AUX as the
source.
# AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX1/
AUX2 (auxiliary input setting) on the previous page.
Using an external unit
An external unit refers to a Pioneer product,
such as those which will be available in the fu-
ture. Although incompatible as a source, the
basic functions of up to two external units can
be controlled with this unit. When two external
units are connected, the external units are auto-
matically allocated to external unit 1 or external
unit 2.
The basic operations of the external unit are ex-
plained below. The allocated functions will differ
depending on the connected external unit. For
details concerning these functions, refer to the
owner's manual for the external unit.
Selecting the external unit as the source
% Press SRC/OFF to select EXT as the source.
Basic operations
The functions allocated to the following opera-
tions will differ depending on the connected ex-
ternal unit. For details concerning these
functions, refer to the owner's manual for the
connected external unit.
% Press BAND/ .
% Press and hold BAND/ .
% Turn LEVER.
% Turn and hold down LEVER.
% Press or .
Using the functions allocated to 1 to
6 keys
1 Press (list).
2 Use M.C. to select Key 1 to Key 6.
Turn to change Key 1 to Key 6 and press.
Advanced operations
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
Function1 (function 1)—Function2 (function 2)
—Function3 (function 3)—Function4 (function
4)—Auto/Manual (auto/manual)
4 Press M.C. to select the desired setting.
Using different entertainment
displays
You can enjoy entertainment displays while lis-
tening to each sound source.