Audio Adjustments; Audio Control - Kenwood KDC-BT948HD Instruction Manual

Audio Adjustments

SRC MENU VOL
4 ¢

Audio Control

You can adjust following Audio Setting items.
Display Overview
"SubWoofer Level" You can set subwoofer level.
"–15" — "0" — "+15"
"Bypass": Disables the DSP function.
"DSP Set"
"Through": Enables the DSP function.
"Equalizer" Sets the sound quality.
- Preset Equalizer curve Select (page
- Manual Equalizer Control (page
"Bass Boost" Sets the Bass Boost level in two steps.
"OFF"/ "Step1"/ "2"
"HIGHWAY-SOUND" Compensates the low volume or bass sound
being lost by road noises to make vocal sound
clearer.
"OFF"/ "Step1"/ "2"/ "3"
"Supreme+" Turns ON/OFF the Supreme plus function.
Can be set while Music CD source, Audio file
source of USB and iPod source.
"ON"/ "OFF"
"Position" Compensates the sound environment in
accordance with the listening position.
- Listening Position Selection (page
- Listening Position Fine Adjustments (page
42).
"Balance" Adjusts left/right speaker balance.
(Left) "L15" — "0" — "R15" (Right)
"Fader" Adjusts front/rear speaker balance.
(Rear) "R15" — "0" — "F15" (Front)
"2Zone Rear Volume" Refer to
"SubWoofer" Turns on/off the subwoofer output.
"ON"/ "OFF"
"Detailed Setup"
"Car Type" To get clear sound, set the sound environment
according to the location and size of physically
"Speaker"
installed speakers with reference to the
"Car Type Adjust"
followings:
"X'Over"
- Car Type Selection (page
- Speaker Setting (page
- Car Type Fine Adjustments (page
- X'Over Setting (page
"Volume offset" Sets each source's volume as a difference from
the basic volume.
"–8" — "0" (AUX: "–8"— "+8")
40
|
KDC-X995/ KDC-BT948HD
41).
41).
42).
<Dual Zone System> (page 42).
44).
44).
45).
46).
"2Zone" Sets the Dual Zone System.
- Dual Zone System (page
"2Zone Select"
"Preset" Sets the audio preset.
- Audio Preset Memory (page
- Audio Preset Recall (page
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than "STANDBY".
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Make a setting
Press the [4] or [¢] button to select a
setting value, and then press the [VOL] knob.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Remarks
• DSP Set
When "DSP Set" is set to "Bypass", the DSP function is
disabled , and the colored items can not be set.
• HIGHWAY-SOUND
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
This function is not effective for the Tuner source.
• Supreme+ (Supreme Plus)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range that is cut
off when encoding. The bass and vocal sound that are cut
off by encoding are supplemented for the reproduction
of natural sound quality. Supplementing is optimized by
compression format (AAC, MP3 or WMA) and processed
according to bit rate. The effect is negligible with music
that is encoded at high bit rate, variable bit rate or has
minimal high frequency range.
The bass and vocal sound of Music CD/ iPod is also
supplemented.
• Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
42).
46).
47).
( : Factory setting)