Play Function; Usb Setting - Kenwood DPX308U Instruction Manual

Play function

Scan play
Press the [2] button.
Successively plays the intro of the music in the
folder.
When Scan Play is turned on, "FILE SCAN" is
displayed.
Pressing this button again plays songs in the
normal mode starting with the song being played
now.
Random play
Press the [3] button.
Randomly plays the music in the folder.
When Random Play is turned on, "FOLDER
RANDOM" is displayed.
Press this button again cancels the Random play.
Repeat play
Press the [4] button.
Switches between File Repeat ("FILE REPEAT"),
Folder Repeat ("FOLDER REPEAT"), and OFF
("REPEAT OFF") when pressed.
⁄
•
The Music Editor media does not allow you select folder
repeat play.

USB Setting

You can select the following USB Setting items.
1
Select USB source
Press the [SRC] button.
Select the "USB" display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "SETTINGS".
4
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"SETTINGS"
"SKIP SEARCH" Sets the ratio of skip performed with
Search (Function of Music Editor media)>
(page
"0.5%"/ "1%"/ "5%"/ "10%"
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
•
The setting of "SKIP SEARCH" in
and that in <USB Setting> (page 17)
Changing the setting of one reflects the other.
<Skip
16).
( : Factory setting)
<iPod Setting> (page 12)
are always the same.
English
17
|