Table of Contents
Advertisement
Getting
Started
3
1
Open
the battery
compartment.
2
Insert two batteries
type R06 or AA,
following
the indications
(+ -) inside the
compartment.
3
Close the cover.
Using the remote
control
4
S
Connect
the AC power
cord to the power
outlet.
Turn on the TV and your AV receiver.
Select the appropriate
input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment
owner's
manual for detail.
Turn this unit on.
Set the TV to the correct
Video IN
channel. (e.g. EXT1, EXT2, AV1, AV2,
AUDIO/VIDEO,
etc. Refer to your TV
owner's
manual for derail)
The front display lights up and the
default screen appears on the TV.
Point the remote
con_
at the sensor,
within
/
approximately
6 m
/
\
(20 feet) of the uii_
(,;,;:5
io_ooi
L
J
Handling
the
remote
control
•
Do not spill water
or other
liquids on
the remote
control.
•
Do not drop the remote
control.
•
Do not leave or store
the remote
control
in the following
types of
conditions:
-
high humidity
such as near a bath
-
high temperature
such as near a heater
or
stove
-
extremely
low temperature
-
dusty places
This DVD Player is compatible
with both
NTSC and PAL. Select the color
system
that matches
your TV.
TV TYPE
1
Press SETUP,
2
Press • repeatedly to select {VIDEO
SETUP PAGE}.
3
Press J,V to highlight {TV TYPE}, then
press
•.
Advertisement
Table of Contents
