Table of Contents
Advertisement
Preparation
Never make or change connections with
the power switched
on.
•
Depending on the equipment you wish
to connect, there are various ways you
could connect
this unit. Possible
connections
are shown in the following
drawings.
•
Please refer to the manuals of other
equipment as necessary to make the
best connections.
•
Do not connect
this unit via your VCR.
The video quality could be distorted
by
the copy protection
system.
•
Do not connect this unit's audio out
jack to the phono
in jack of your audio
system.
Notes:
-
If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
-
SA-CD audio signal is not output from
DIGITAL OUT jacks.
-
If you wish to enjoyDolbyDigital,
DTS, and
MPEG you must connect this unit to the AV
receiver that support those.
This player has two types of analog output
jacks.
This unit has COAXIAL
and OPTICAL
digital out jacks. Connect
one or both of
them to your AV receiver
equipped
with
Dolby
Digital, DTS, or MPEG decoder
using each specific cable (separate
purchase).
6CH
DISCRETE
jacks
To reproduce
multi-channel
Super audio
CD and DVD-Audio,
connect
these
jacks
to your AV receiver's
multi channel
input
jacks using commercially
available audio
pin cables.
You will need to set this unit's digital
output
to ALL
(see page 24
"DIGITAL
OUTPUT").
I
Advertisement
Table of Contents
