Auto Repeat; Recording; Recording & One-Touch Timer Recording (Otr); Timer Recording - Toshiba SDV398 Owner's Manual

Auto Repeat

The unit will automatically rewind the cassette tape when it has reached the end and will automatically start playback unless you press
[STOP C] or you turn off the unit.
VCR VCR
1 Press [SETUP], and choose "AUTO REPEAT".
Note:
• The auto repeat function can also be set "ON" or "OFF" by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the stop mode.

Recording

Recording & One-touch Timer Recording (OTR)
VCR VCR
1 Insert a recordable
cassette tape.
3 Press [SPEED] to select the desired tape speed.
Tape speed
Type of tape
SP mode
SP
SLP mode
Press [REC/OTR] until desired recording time is selected.
4
REC
(normal recording)
REC
5 Press [STOP C] to
stop recording.

Timer Recording

VCR VCR • Insert a recordable cassette tape.
1 Press [SETUP]. Select "TIMER PROGRAMMING".
EN
E8EB6CD_SD-V398KC_EN_v1.indd 16 E8EB6CD_SD-V398KC_EN_v1.indd 16
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
or
TV STEREO [ON]
SAP
2 Select the channel to record.
or
Recording / playback time
T60 T120 T160
1hour 2hours 2-2/3hours
3hours 6hours 8hours
OTR (0:30) OTR (1:00).....
OTR (8:00) OTR (7:30)
6 Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
OPEN/CLOSE
- M E N U - TIMER PROGRAMMING
B TIMER PROGRAMMING
PROG 12345678
AUTO REPEAT [OFF]
DATE
CHANNEL SET UP
START TIME
CLOCK SET
END TIME
LANGUAGE SELECT
AUDIO OUT CHANNEL
TV STEREO [ON]
REC SPEED
SAP
Available program number flashes.
2
Press [B] to "AUTO REPEAT" to set "ON" or "OFF".
[OFF]
Press [SETUP] to exit.
1 5 6
To stop recording temporarily (pause mode)
Press [PAUSE F].
• During the recording in pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Accidental Erasure Prevention
To prevent accidental recording, remove erase-protection tab
of the cassette tape. To record on it later, cover the hole with
adhesive tape.
2 Select an empty program number.
Then press [B] to go to next step.
or
– 16 –
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
6
3
2
5
4
4
erase-protection tab
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – –
END TIME – – : – –
CHANNEL – –
REC SPEED – –
2009/01/29 17:05:20 2009/01/29 17:05:20
[ON]
[ON]
– –
– –