Connecting To A Cable / Satellite Box; Connection To Rf Modulator (Not Supplied) - Toshiba SDV398 Owner's Manual

Connecting to a Cable / Satellite Box

Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
If your TV has AUDIO/VIDEO input jacks, see the section "Connection to a TV" on page 10. If not, it is still possible to connect this unit to your
TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.

Connection to RF Modulator (Not Supplied)

1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator's channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a modulator/antenna switch, set it according to
your RF modulator's manual.
If your TV does not have AUDIO / VIDEO input jack.
(rear of this unit)
DVD DVD/VCR VCR VCR
DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT AUDIO IN AUDIO IN
VIDEO OUT
AUDIO OUT OUT OUT
Y L L L
L
C B /
R R R
P B
COAXIAL
VIDEO OUT VIDEO IN VIDEO IN
R
C R /
P R
RF Cable
(supplied)
ANT. IN
EN
E8EB6CD_SD-V398KC_EN_v1.indd 12 E8EB6CD_SD-V398KC_EN_v1.indd 12
DVD/VCR VCR
RCA video cable
AUDIO OUT AUDIO IN
L L
R R
VIDEO OUT VIDEO IN
RCA audio
cable
rear of this unit
DVD DVD/VCR VCR
DIGITAL COMPONENT AUDIO OUT AUDIO IN
AUDIO S-VIDEO
AUDIO OUT OUT OUT VIDEO OUT
Y L L
L
C /
B R R
P
B
COAXIAL
VIDEO OUT VIDEO IN
R
C /
R
P R
ANT-IN
DVD/VCR
ANT-OUT
AUDIO OUT
L
R
RCA Audio/Video RCA Audio/Video
VIDEO OUT
Cables Cables
(supplied) (supplied)
3
R L
TO TV VIDEO IN AUDIO IN CHANNEL
STEREO AUDIO / VIDEO RF Modulator
(commercially available)
RCA audio cable
RCA video cable
VIDEO IN
VIDEO OUT
AUDIO IN
L
R
RF coaxial
cable
ANT.OUT
ANT. IN
This connection is for
TV loop through only
ANT-IN RF coaxial cable
ANT-OUT
ANT-IN
RF coaxial
cable
ANT-OUT
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the
RF modulator's channel 3/4 switch to. For more details,
follow the instructions supplied with the RF modulator.
Antenna
ANT-IN
RF coaxial cable
ANT-OUT
(commercially
available)
RF coaxial cable
(commercially available)
4
ANT. IN
– 12 –
R L
AUDIO OUT
cable/satellite box
ANT. IN
satellite
dish
or
cable TV
company
Cable
Signal
Note:
• The quality of picture
may become poor if the
unit is connected to an RF
modulator.
2009/02/05 13:04:42 2009/02/05 13:04:42