Advertisement
Installing Toshiba SD-K740 Front Flap Tray Door Spring
To reassemble your device, follow these instructions in reverse order.
This document was last generated on Feb 24, 2012.
© iFixit — CC BY-NC-SA
Step 9
Remove the spring from the end of the right peg by
pulling the door away from the spring.
Do not pull away from the front panel until
the spring has been removed from the flap.
Step 10 — Front Flap Tray Door Spring
Remove the .384 inch screw holding the spring to
front panel.
Step 11
Slide the spring off of the underlying peg.
www.iFixit.com
Page 4 of 4
Advertisement
