Onkyo TX-NR818 Instruction Manual page 87

Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
INPUT MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
(North American models)
33101:
MHL-enabled mobile device
(European, Australian, and Asian models)
32910:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the
(limited to some models). The component must be able to
receive remote control commands via
connected to the AV receiver via HDMI.
Use the following remote control codes:
32910/33101/33501/31612:
Blu-ray Disc/DVD player with
*1 The supported by the AV receiver is the CEC system
control function of the HDMI standard.
Press the appropriate REMOTE Press the appropriate REMOTE
MODE button first. MODE button first.
*1
and be
En-87
Controlling Other Components
■
TV operation
Available buttons
Number: 1 to 9, 0
, INPUT, TV VOL /
GUIDE
Number: +10
DISPLAY
/ / /
ENTER
MUTING
SETUP CH +/–
PREV CH
, , , , ,
*1
, RETURN
A (Red) *1 CLR
B (Green) *1
C (Yellow) *1
D (Blue) *1
■
Blu-ray Disc/HD DVD player operation
Available buttons
TOP MENU Number: 1 to 9, 0
Number: +10
/ / /
ENTER
DISPLAY
SETUP
SOURCE
MUTING
, , , , ,
, CH +/–
A (Red) DISC +/–
B (Green) MENU
RETURN
C (Yellow)
D (Blue) CLR
*1
*1