Remote Controller - Onkyo TX-NR818 Instruction Manual

Remote Controller

Controlling the AV Receiver
*1
To control the AV receiver, press RECEIVER to select
Receiver mode.
You can also use the remote controller to control
Onkyo Blu-ray Disc/DVD player, CD player, and
other components.
See "Entering Remote Control Codes" for more
details (➔ page 85).
For detailed information, see the pages in parentheses.
RECEIVER button (23)
ACTIVITIES buttons (50)
*2
REMOTE MODE/INPUT SELECTOR buttons (26)
SP (speaker layout) button (49)
*2
and ENTER buttons
/ / /
Q SETUP button (51)
Listening Mode buttons (40)
DIMMER button (48)
DISPLAY button (48)
MUTING button (49)
VOL / button (26)
RETURN button
HOME button (47)
SLEEP button (48)
En-12
Safety Information and Introduction
■
Controlling the tuner
To control the AV receiver's tuner, press TUNER (or
RECEIVER).
You can select AM or FM by pressing TUNER repeatedly.
/ buttons (34)
D.TUN button (34)
DISPLAY button
CH +/– button (35)
Number buttons (34)
*1 When you want to change the remote controller mode (target
component) without changing the current input source, press
MODE and within about 8 seconds, press REMOTE MODE.
Then, using the same AV receiver's remote controller, you can
control the component corresponding to the button you
pressed.
*2 These buttons can also be used when a REMOTE MODE
other than Receiver mode is selected.