Volume Adjustment - Marantz PM-KI PEARL User Manual

BASIC OPERATIONS
7

Volume Adjustment

Adjust the volume as desired with the VOLUME knob on
the front panel or the VOLUME 3 or 4 button on the remote
controller.
VOLUME knob
To increase volume, turn the VOLUME knob clockwise or press
the VOLUME 3 button on the remote controller.
To decrease volume, turn the VOLUME knob counterclockwise
or press the VOLUME 4 button on the remote controller.
When the VOLUME knob on the front panel is turned slowly,
the volume can be fine-adjusted in 0.5 dB steps, whereas when
it is turned rapidly, the volume level changes greatly.
7
Tone Adjustment
According to your preference and acoustic conditions of the
room, the bass and treble tones can be adjusted.
TONE button
PHONO BALANCED CD
RECORDER 1 LINE 1
RECORDER 2 LINE 2
TRIM EXIT TONE
+
L
ENTER
DISPLAY - ATT
Before adjusting the tone, press the TONE button on the front
panel or on the remote controller to set it to ON.
For bass tone adjustment, turn the BASS control knob.
For treble tone adjustment, turn the TREBLE control knob.
DISPLAY - ATT
VOLUME34
VOLUME
buttons
Tone control knobs
TONE button
R
7
Attenuating the Volume Level
Temporarily
The volume level from the speakers can be temporarily
attenuated.
ATT button
1.
Press the ATT button on the front panel or on the remote
controller to attenuate the output volume level.
2.
Press the ATT button on the front panel or on the remote
controller again to cancel attenuation.
For details on How to Set Attenuation Level, see page
19.
ENGLISH
L R
ENTER
DISPLAY - ATT
ATT button
VOLUME
11