Computer Setup-Standard Cmos Features - HP dx2250 - Microtower PC Utility Manual

Computer Setup—Standard CMOS Features
NOTE:
configuration.
Table 3 Computer Setup—Standard CMOS Features
Option
Date (mm:dd:yy)
Time (hh:mm:ss)
PATA Controller
PATA Ch 0 Master
PATA Ch 0 Slave
SATA Controller
SATA Mode
4 Computer Setup (F10) Utility
Support for specific Computer Setup options may vary depending on the hardware
Description
Allows you to set system date.
Allows you to set system time.
Disables/enables PATA Controller.
For each, if PATA HDD is used, allows you to:
●
run HDD self-test for selected channel:
● SMART Status Check
●
HDD Short Self-Test
●
HDD Extended Self-Test
●
set PATA Ch 0 Master/Slave device details on selected channel to:
●
None
●
Auto
●
Manual
●
set access mode on selected channel to:
●
CHS (Cylinder-Head-Sector)
● LBA (Logical Block Addressing)
●
Large
● Auto
●
view:
● Firmware Version
●
Capacity
● Cylinder
●
Head
● Precomp
●
Landing Zone
●
Sector
Disables/enables onboard SATA controller.
Allows you to set the onboard SATA mode to:
●
Native IDE
● Legacy IDE
ENWW