HP dx2250 - Microtower PC Hardware Reference Manual page 24

Compaq business pc microtower

Hide thumbs Also See for dx2250 - Microtower PC:

Table of Contents

Remove the computer access panel.

Locate the battery and battery holder on the system board.

NOTE

to gain access to the battery.

Depending on the type of battery holder on the system board, complete the following instructions

to replace the battery.

Type 1

Lift the battery out of its holder.

Figure 3-1

Slide the replacement battery into position, positive side up. The battery holder automatically

secures the battery in the proper position.

Type 2

To release the battery from its holder, squeeze the metal clamp that extends above one edge

of the battery. When the battery pops up, lift it out (1).

Chapter 3 Battery Replacement

On some computer models, it may be necessary to remove an internal component

Removing a Coin Cell Battery (Type 1)

ENWW

Table of Contents

Compaq dx2250